Pulsatron - Pumps

Summary

The PULSAtron Series A Plus provides manual control options for stroke length and stroke rate, with the additional choice of external pace for automatic control. Optional features include external stop function and 2000:1 turndown control. With ten available models, the series offers pressure capabilities up to 250 psig (17 bar) and flow capacities reaching 58 gpd (9.1 lph), featuring a turndown ratio of 100:1. Metering performance is consistently reproducible to within +/- 3% of maximum capacity.

Summary

The PULSAtron Series C provides manual control for stroke length adjustment paired with a fixed stroke rate. Optional features encompass external pace, a momentary on/off switch for pump priming, or a toggle on/off switch for manual override of all control functions. This series includes four models, offering pressure capabilities up to 80 psi (5.6 bar) and flow capacities reaching 30 gpd (4.7 lph), featuring a turndown ratio of 10:1. Metering performance consistently reproduces within +/- 3% of maximum capacity.

Summary

Similar to the PULSAtron Series C, the Series C Plus provides standard manual control over stroke length and stroke rate, with the option for automatic control using external pace. The key distinction lies in the pressure rating, where the Series C Plus offers four models with pressure capabilities up to 80 psi. Additionally, it has flow capacities reaching 30 gpd (4.7 lph), boasting a turndown ratio of 100:1. Metering performance remains consistently reproducible within +/- 3% of maximum capacity. The guided check valves feature state-of-the-art seat and ball designs, ensuring precise seating, excellent priming, and extended suction life. The timing circuit is highly reliable and designed to be virtually unaffected by temperature, EMI, and other electrical disturbances.

Summary

The PULSAtron Series E pump provides manual control through online adjustable stroke rate and stroke length. Approved for both demanding outdoor and indoor applications, it features pressure capabilities up to 250 psi (17 bar) at 5 gpd (0.8 lph) and flow capacities reaching 44 gpd at 100 psi (7 bar), with an impressive turndown ratio of 100:1. Metering performance remains consistently reproducible within +/- 3% of the maximum capacity.

Summary

The Pulsation Series E Plus provides standard manual control for stroke length and stroke rate, with the added option to select between 4-20mA and external pace inputs for automatic control. With twenty available models, it offers pressure capabilities up to 300 psi (21 bar) at 3 gpd (0.5 lph), and flow capacities reaching 600 gpd (94.6 lph) at 30 psi (2 bar). The turndown ratio stands at an impressive 100:1, and metering performance is consistently reproducible to within ±2% of the maximum capacity.

Summary

Based on the reliable PULSAtron Series pump platform, the E+ Ratio Control (RC) diaphragm metering pump offers manual control over stroke length, automatic speed control based on a water meter input signal, and selectable ratio control from 0.1 Oz/Gallon to 1.0 Oz/Gallon. With three available models, it features pressure capabilities up to 100 PSIG (7 BAR) and flow capabilities ranging from 44 GPD (7 LPH) to 120 GPD (18.9 LPH). The PULSAtron Series is designed for precise dosing with a reproducibility within ± 2% of maximum capacity. The RC Series is particularly suitable for Medicator applications, accurately dosing nutritional supplements to enhance livestock health.

Summary

Based on the reliable PULSAtron Series pump platform, the E+ Ratio Control (RC) diaphragm metering pump offers manual control over stroke length, automatic speed control based on a water meter input signal, and selectable ratio control from 0.1 Oz/Gallon to 1.0 Oz/Gallon. With three available models, it features pressure capabilities up to 100 PSIG (7 BAR) and flow capabilities ranging from 44 GPD (7 LPH) to 120 GPD (18.9 LPH). The PULSAtron Series is designed for precise dosing with a reproducibility within ± 2% of maximum capacity. The RC Series is particularly suitable for Medicator applications, accurately dosing nutritional supplements to enhance livestock health.

Summary

The Pulsation Series MP stands as a true microprocessor-controlled instrument designed for precise and accurate metering control. Packed with standard features, the Series MP includes automatic control via 4-20mA or 20-4 mA inputs, external pace with a stop feature, and a 16-character LCD display supporting English, French, and German languages. The optional 4-20mA output signal provides remote indication of pump speed, allowing confirmation that the pump is adjusting to process parameters and estimating chemical usage over time. With nineteen distinct models, the Series MP offers pressure capabilities up to 300 psi (21 bar) at 3 gpd (0.5 lph) and flow capacities reaching 504 gpd (79.5 lph) at 20 psi (1.3 bar). The turndown ratio stands at an impressive 1000:1, ensuring there is a Pulsatron MP Series pump to perfectly fit your process requirements.

Summary

The Pulsation Series T7 is specifically designed for timed chemical product feeding, commonly used for applications like biocide feed in open-air cooling towers. The feed cycle is initiated and controlled by the programmable timer, offering a comprehensive and cost-effective metering solution for timed applications. The Series T7 features a 7-day programmable timer, adjustable in 1-minute increments, with up to 8 on/off cycles per day. Timed events can be set for any day of the week in a 7-day cycle. Additional control features include a standby mode, continuous 'ON' mode, and the ability to adjust stroke length from 0 to 100%.

Summary

Summary

March Pump's industrial TE-10K-MD stands as an American-made seal-less centrifugal magnetic drive pump. The standard wet end is constructed with materials such as natural Kynar (PVDF), glass-filled Kynar (PVDF), Viton, Carbon, and Ceramic. It features a 3-inch male pipe thread for the inlet connection and a 2-inch male pipe thread for the outlet. This pump is designed for versatile use in different environments.

Summary

March Pump's industrial 140-4 is an American-made seal-less centrifugal magnetic drive pump that is often used in aquariums. It is capable of producing a maximum flow of 14 gallons per minute at 2 feet, with a maximum head of 11.5 feet (approximately 5 PSI). The standard wet end, including the materials in contact with the solution, is made up of Polypropylene, Buna N, and Ceramic. The inlet connection is 1-1/8 inch smooth, while the outlet is 7/8 inch smooth. It can handle a variety of chemicals, including but not limited to Acetic Acid, Acetone, Ammonium Sulfate, Citric Acid, Ethylene Glycol, Ferric Sulfate, Hydrogen Peroxide, Potassium Hydroxide, Sodium Chloride, Fresh Water, Salt Water, and numerous others.

Summary

March Pump's industrial 320-CP-MD is an American-made seal-less centrifugal magnetic drive pump suitable for various uses. It features a standard wet end composed of Polypropylene, Viton, and Ceramic materials. The inlet connection is 1/2 inch male pipe thread, and the outlet is 3/8 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.083 Horsepower fan-cooled motor, operational on either 50 or 60 hertz, with performance differences between the frequency options. The pump can withstand a maximum internal pressure of 50 PSI, and it is designed to handle mildly or highly corrosive chemicals, acids, and solvents, with a maximum liquid temperature of 190 Fahrenheit or 87 Celsius.

Summary

March Pump's industrial 335-CP-MD is an American-made seal-less centrifugal magnetic drive pump with a standard wet end composed of Polypropylene, Viton, and Ceramic materials. The inlet connection is 3/4 inch male pipe thread, and the outlet is 3/4 inch male pipe thread. The pump comes with a standard motor, available in either 1 Phase 115/230V or 3 Phase 230/460V, featuring a 0.33 Horsepower totally enclosed fan-cooled motor. It is designed to operate on either 50 or 60 hertz for versatile use.

Summary

March Pump's industrial 893 Series is an American-made submersible seal-less centrifugal magnetic drive pump. It operates submerged and features a standard wet end with components like Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet. When submerged, Epoxy, Delrin, and the motor leads are also in contact with the solution. The inlet connection is 3/8 inch female pipe thread, and the outlet is 3/8 inch smooth. The pump is equipped with a standard motor, a 0.006 Horsepower DC Brushtype Motor, available in 24 Volts, with an operating range from 0 to 26 Volts.

Summary

March Pump's industrial MDX-1/2 is an American-made seal-less centrifugal magnetic drive pump. The standard wet end features components like Polypropylene, carbon-filled Kynar (PVDF), Buna N, and Ceramic Magnet, ensuring compatibility with various solutions. The inlet connection is 1/2 inch smooth, and the outlet is 1/2 inch smooth. The pump comes with a standard motor, available in 1 Phase 115V or 230V, featuring a 0.025 Horsepower fan-cooled motor. It is designed to operate on 60 hertz at 115V or 50 and 60 hertz at 230V.