📞 +1 877-742-2878
- Home /
- March /
- Beer Pumps
March Pumps - Magnetic Drive Beer Pumps
Materials
- Polysulfone Front Housing Teflon, Silicone
- Stainless Steel Rear Housing and Shaft
- Teflon Thrust Washer
- Ryton/Teflon Impeller
Specifications
- Max Flow: 7 GPM
- Max Head: 18.6 FT
- Electrical/Air: 115V 50/60Hz
- Max Liquid Temperature: 250°F
- FDA Compliant
Summary
March Pump's 815-PL Beer Pump is an American-made seal-less centrifugal magnetic drive pump tailored for home brewing. It incorporates a standard wet end with materials such as Polysulfone, Stainless Steel, Teflon, Silicone, and Ryton/Teflon/Glass that come into contact with the solution. The inlet connection is 1/2 inch male pipe thread, and the outlet is 1/2 inch male pipe thread. The pump is driven by a standard motor, available in 1 Phase 115V or 230V, featuring a 0.04 Horsepower fan-cooled motor that can operate on either 50 or 60 hertz. The 815-PL Beer Pump motor is equipped with a six-foot cord, a plug, and a base.
Materials
- Polysulfone Front Housing Teflon, Silicone
- Stainless Steel Rear Housing and Shaft
- Teflon Thrust Washer
- Ryton/Teflon Impeller
Specifications
- Max Flow: 8 GPM
- Max Head: 18.6 FT
- Max Internal Pressure: 50 PSI
- Max Liquid Temperature: 250°F
- FDA Compliant
Summary
March Pump's 815-PL-C Beer Pump is an American-made seal-less centrifugal magnetic drive pump suitable for various uses, including home brewing and hot water systems. The pump is designed for effective fluid transfer, featuring a standard wet end with components such as Polysulfone, Stainless Steel, Teflon, Silicone, and Ryton/Teflon/Glass that interact with the solution. The inlet connection incorporates 3/8 inch female pipe thread and 3/4 inch male pipe thread, while the outlet is equipped with 1/2 inch male pipe thread. Powering the pump is a standard motor available in 1 Phase 115V or 230V, with a 0.04 Horsepower fan-cooled motor that accommodates operation on either 50 or 60 hertz.
Materials
- Silicone O-Ring
- Stainless Steel Rear Housing and Shaft
- Teflon Thrust Washer
- Ryton/Teflon Impeller
Specifications
- Max Flow: 7 GPM
- Max Head: 18.6 FT
- Max Internal Pressure: 150 PSI
- Max Liquid Temperature: 250°F
- FDA Compliant
Summary
March Pump's 815-SS Beer Pump is an American-manufactured, seal-less centrifugal magnetic drive pump suitable for various liquid-handling needs. Capable of efficiently moving liquids, it offers a steady flow rate and reliable performance. The wet end, which interfaces with the liquid, incorporates materials like Stainless Steel, Teflon, Silicone, and Ryton/Teflon/Glass. It features a 1/2-inch male pipe thread for the inlet connection and a 1/2-inch male pipe thread for the outlet. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan-cooled motor adaptable to both 50 or 60 hertz, each with distinct performance characteristics. The motor of the 815-SS Beer Pump is equipped with a six-foot cord, a plug, and a base.
Materials
- Silicone O-Ring
- Stainless Steel Rear Housing and Shaft
- Teflon Thrust Washer
- Ryton/Teflon Impeller
Specifications
- Max Flow: 8 GPM
- Max Head: 18.6 FT
- Max Internal Pressure: 150 PSI
- Max Liquid Temperature: 250°F
- FDA Compliant
Summary
March Pump's industrial 815-SS-C Beverage Pump is an American-manufactured, advanced centrifugal magnetic drive pump suitable for various fluid transfer needs. It is capable of delivering a reliable flow rate, making it versatile for applications such as home brewing and hot water systems. With a design that emphasizes durability, the pump's standard components in contact with the fluid include Stainless Steel, Teflon, Silicone, and Ryton/Teflon/Glass. The inlet connection is a 3/4-inch male pipe thread, and the outlet is a 1/2-inch male pipe thread, offering flexibility in installation. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan-cooled motor, adaptable to both 50 or 60 hertz frequencies.
Materials
- Polysulfone Front and Rear Housing
- Stainless Steel Shaft
- Buna N O-Ring
- Ceramic Thrust Washers
Specifications
- Max Flow: 17 GPM
- Max Head: 27 FT
- Max Internal Pressure: 50 PSI
- Max Liquid Temperature: 225°F
- FDA Compliant
Summary
March Pump's AC-5B-MD Beer Pump is an American-made seal-less centrifugal magnetic drive pump tailored for homebrewing. With a capacity to generate a flow and a head, this pump is designed for effective use in homebrewing setups. The standard wet end features components such as Polysulfone, Buna N, Ceramic, and Ceramic Magnet that come into contact with the solution. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. Powering the pump is a standard motor, available in 1 Phase 115V or 230V, with a 0.125 Horsepower fan-cooled motor that can operate on either 50 or 60 hertz.
Materials
- Polysulfone Impeller
- 316 Stainless Steel Front and Rear Housing
- Buna-N O-Ring
- Carbon Bushing
Specifications
- Max Flow: 17 GPM
- Max Head: 27 FT
- Max Internal Pressure: 200 PSI
- Max Liquid Temperature: 250°F
- FDA Compliant
Summary
March Pump's AC-5SSB-MD Beer Pump is an American-made seal-less centrifugal magnetic drive pump crafted for homebrewing. With the capability to generate a flow and head, this pump is tailored for efficient use in homebrewing applications. The standard wet end comprises materials like Stainless Steel, Polysulfone, Buna N, Ceramic, and Ceramic Magnet, ensuring compatibility with the solution. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The pump is powered by a standard motor, available in 1 Phase 115V or 230V, featuring a 0.125 Horsepower fan-cooled motor that can operate on either 50 or 60 hertz.
Materials
- Polysulfone Impeller
- 316 Stainless Steel
- Buna N O-Ring
- Carbon Bushing
Specifications
- Max Flow: 18 GPM
- Max Head: 29 FT
- Max Internal Pressure: 200 PSI
- Max Liquid Temperature: 250°F
- FDA Compliant
Summary
March Pump's TE-5SSB-MD Beer Pump is an American-made seal-less centrifugal magnetic drive pump designed for homebrewing. With the capability to generate a flow and head, this pump is tailored for efficient use in homebrewing setups. The standard wet end comprises materials like Stainless Steel, Polysulfone, Buna N, Ceramic, and Ceramic Magnet, ensuring compatibility with the solution. The inlet connection is 1 inch female pipe thread, and the outlet is 1/2 inch male pipe thread. The pump is available with two standard motors. The first is a 1 Phase 60 hertz 115/230V and 50 hertz 110/220V 0.2 horsepower totally enclosed fan-cooled motor. The second option is a 3 Phase 60/50HZ 230/460V IEC totally enclosed 0.17 horsepower fan-cooled motor.
Materials
- 316 Stainless Steel (Front Housing, Rear Housing, Shaft)
- Glass Filled Kynar Impeller
- EPDM O-Ring
- Carbon Bushing
Specifications
- Max Flow: 53 GPM
- Max Head: 57.5 FT
- Max Internal Pressure: 200 PSI
- Max Liquid Temperature: 225°F
- FDA Compliant
Summary
March Pump's TE-7SSB-MD Beer Pump is an American-made seal-less centrifugal magnetic drive pump crafted for homebrewing. This pump is designed to effectively generate a flow and head for optimal performance in homebrewing setups. The standard wet end is composed of durable materials such as 316 Stainless Steel, Glass Filled Kynar, EPDM, Mica Teflon, and Ceramic, ensuring compatibility with the solution. The inlet and outlet connections feature 1.5 inch Tri Clamp fittings. Powering the pump is a standard motor, available in 1 Phase 115V/230V, boasting a 1 Horsepower totally enclosed fan-cooled motor that can operate on either 50 or 60 hertz.
