📞 +1 877-742-2878
FLOWLINE LEVEL TRANSMITTERS
The DataView™, DataPoint™, DataLoop™ and PodView™ Flowline level transmitters are made for general purpose use and can be AC or DC powered. The DataLoop L125-2 is an intrinsically safe model, and is FM and CSA approved. Switch-Pro™ Flowline level switches have general purpose, CSA approved and isolation models to fit any remote level controller requirements. The company’s Smart Trak, Switch Trek and Switch Pak product lines provide reliable liquids level detection, and are made for water, wastewater, oil and chemicals.
Features
- LED main display and secondary unit display with relay status
- Easy configuration via the push button display module
- 1/8 DIN enclosure with NEMA 4X faceplate and shallow case
- Isolated power supply to sensor with optional 4-20 mA repeater
- Non-volatile memory with security password protection
- 32-point linearization function for volumetric measurement
- Available with NEMA boxes and tank alarm accessories
Applications
- General purpose two-wire level sensors
- General purpose three-wire level sensors
How the DataView™ LI55 Level Sensor Controller Works
The tank or silo level controller, powered by either AC or DC, is designed for general purposes, displaying engineering units using a single 4-20 mA level transmitter. It is available in three configurations, featuring optional two or four programmable relays and an isolated 4-20 mA repeater. Each relay can be configured with a single set point, serving as a high or low level alarm, or latched on two set points for automatic fill or empty control in simplex or duplex modes. Opt for this panel-mount controller when using general-purpose two or three-wire level sensors. For field-mount installation, include a single or double NEMA box with optional flash and/or audible alarm.
Features
- Bright LED display indicates level in custom engineering units
- Fail-safe relay control of pumps or valves with 0-60 second delay
- Easy push button configuration of span, display and relay set points
- 35 mm DIN rail mount PP enclosure with removable terminal strips
- Invert switch changes relay state from NO to NC without rewiring
- Bar graph display indicates the percentage of measured span
- Available with NEMA boxes and tank alarm accessories
Applications
- General purpose two-wire level sensors
- General purpose three-wire level sensors
How the DataPoint™ LC52 Level Sensor Controller Works
The tank or silo level controller, powered by AC, is designed for general purposes, indicating engineering units through a single 4-20 mA level transmitter. It features two programmable relays and an isolated 4-20 mA repeater. Relay one is configurable based on a single set point, while relay two can be configured on a single set point or latched on two set points for automatic fill or empty control in simplex mode. Opt for this DIN rail mount controller when using general-purpose two or three-wire level sensors. For field-mount installation, include a single or double NEMA box with optional flash and/or audible alarm.
Features
- LCD main display with secondary unit and bar graph display
- Easy configuration via the push button display module
- Available with 2 latching relays and isolated 4-20 ma repeater
- DIN enclosure with NEMA 4X faceplate and shallow case
- Linear, square root and programmable exponent functions
- Non-volatile memory with security password protection
- Available with NEMA boxes and tank alarm accessories
Applications
- General purpose two-wire level sensors
How the DataLoop™ LI23 Level Sensor Indicator Works
The loop-powered tank or silo level indicator for general purposes showcases engineering units in series with a single 4-20 mA continuous level transmitter. It comes with two optional relays and an isolated 4-20 mA repeater. Choose this panel-mount indicator when employing general-purpose two-wire level sensors. For field-mount installation, incorporate a single or dual-indicator NEMA box with optional flash and/or audible alarm features.
Features
- LCD main display with secondary unit and bar graph display
- Easy configuration via the push button display module
- Available with 2 latching relays and isolated 4-20 ma repeater
- DIN enclosure with NEMA 4X faceplate and shallow case
- Linear, square root and programmable exponent functions
- Non-volatile memory with security password protection
- Available with NEMA boxes for easy field installation
Applications
- Intrinsically safe two-wire level sensors
How the DataLoop™ LI24 Level Sensor Indicator Works
The intrinsically safe loop-powered tank or silo level indicator exhibits engineering units connected in series with a single 4-20 mA continuous level transmitter. It offers two optional relays and an isolated 4-20 mA repeater. Opt for this panel-mount indicator when utilizing intrinsically safe two-wire level sensors. For field-mount installation, include a single or dual-indicator NEMA box.
Features
- Field mount indicator for use with EchoPod sensors
- Indicates level or volume and EchoPod relay status
- Enables EchoPod relay set point changes in the field
- Powered directly by the attached EchoPod sensor
- Repeats EchoPod sensor data with no programming
- Corrosion resistant enclosure with NEMA 4 faceplate
Compatibility
- EchoPod sensors operating on V50 firmware or higher
- V50 firmware is available via WebCal® 6 software or higher
- Maximum distance between PodView & EchoPod is 4.5m (15’)
How the PodView™ LI40 Level Sensor Indicator Works
Designed for use with DL _ _ series EchoPod sensors, the general-purpose level indicator showcases the measured value, relevant relay status, and set point configuration of the attached sensor, as configured by the WebCal software. PodView eliminates the need for programming and draws both power and data directly from the connected sensor. Users can conveniently adjust EchoPod relay set points in the field through the indicator. PodView can be installed up to 15’ (4.5m) away from the sensor, either in a panel or a NEMA enclosure.
