📞 +1 877-742-2878
AMT Pumps-submersible & sump pumps
Submersible pumps are specially designed devices that are fully submerged in the fluid they are intended to pump, usually water or other liquids. These pumps are sealed hermetically to prevent water from entering the inner workings of the machine. Submersible pumps are commonly used for various applications, such as drainage, sewage pumping, well water pumping, and fountain systems. Sump pumps are a type of submersible pump specifically designed for the purpose of removing accumulated water from a sump pit or basin. Sump pumps are crucial in preventing water damage in areas prone to flooding or high groundwater levels, providing a reliable solution for maintaining dry conditions in basements and other vulnerable spaces.
Highlights
- Aluminum Construction with Aluminum Impeller (5891-DC) NEW 2020
- Aluminum Construction with Cast Iron Impeller (5890-DC)
- 1/3 HP, 12 Volt DC 30 Amp Motor
- 1-1/2” NPT Discharge
- Buna-N Mechanical Seal with Carbon and Ceramic Faces
- Operates Approximately 60 Minutes on Fully Charged 55 Amp-Hour Battery
- Built-In Carry Handle
- Steel Strainer Built into Pump
- Overload Protection
- On/Off Switch
- Maximum Flow 43 GPM
How the 12 Volt DC Submersibles Work
The AMT Submersible 12 Volt DC pump is crafted for dewatering scenarios with minimal or no electrical access, serving as an emergency backup during power outages. This Aluminum Submersible Pump, operating on 12VDC, is characterized by its lightweight, portability, and suitability for electricity-lacking environments. The unit is supplied fully assembled with a 30-foot power cord, equipped with battery clips for effortless connection to a 12-volt battery.
How the 50 Hz Submersibles Work
AMT Industrial Submersible pumps exhibit characteristics such as being lightweight, portable, dependable, and energy-efficient. The impeller, resistant to clogging, is specifically engineered for general dewatering pump purposes. These applications encompass sump pumps, basements, construction drainage, dewatering, wastewater treatments, agricultural irrigation, flooding, and other scenarios necessitating the removal of clear/drainage water. The motors are rated for continuous duty at 110VAC or 220VAC @ 50 Hz, featuring a standard cord and automatic thermal overload protection.
Highlights
- Cast Iron with Stainless Steel Motor Housing
- Hi Chromium (HCr) Steel Impeller and Cover for Wear Resistance and Durability
- Superior Motor Design for Quiet, Low Noise Operation
- Silicon Carbide Mechanical Seals Plus Shaft Seal
- 3” and 4” Models Feature Companion Flange Connection
- 115 VAC, 230 VAC or 460 VAC @ 60 Hz
- Single or 3 Phase Available
- 2”, 3” or 4” NPT
- 1 to 7.5 Horsepower
- UL/CSA Listed
How the Contractor Submersibles Work
AMT Contractor Submersible pumps are designed for versatile applications in residential, commercial, and industrial environments. These pumps find utility in construction sites, wastewater management, stormwater handling, farming, irrigation, excavation, mining, marine operations, basements, and other drainage scenarios involving liquids with sediment and solids up to 3/8" in diameter. Featuring a self-cleaning impeller made of durable, abrasion-resistant high chromium steel, these pumps ensure longevity. The 3450 RPM electric motor comes with an unfinished power cord that necessitates on-site wiring (controls not provided). Motors are rated for continuous duty, and single-phase models are equipped with thermal overload protection.
Highlights
- Stainless Steel, Cast Iron and Plastic Construction
- Built-in Thermal Protection
- Triplex Seal System; Double Mechanical Seals Plus Shaft Seal
- Automatic Mercury Free Float Switch Included (Except Stainless Steel Model 5780-98)
- U.L./CSA Listed
- 1/2 HP, 115 VAC UL/SJT Cord with 3 Prong Plug
- 1-1/2” to 2” NPT Port Sizes
- Clog Resistant Impellers
- Oil Filed, Quiet Run Motor Design
How the Drainage / Utility Submersibles Work
AMT Submersible Sump pumps are crafted for diverse applications, encompassing sump pits, drainage pits, overflow tanks, basements, dewatering, excavation, grain elevators, construction drainage, cooling towers, and other scenarios demanding the removal of clear water. These pumps from AMT come equipped with a suction screen and an automatic float switch, with the exception of the stainless steel model 5780-98.
Highlights
- Stainless Steel, Bronze and Cast Iron Construction
- Stainless Steel Shaft & Float
- Carbon Bearings
- 29” to 44” Column Height
- 1-1/2” or 2” NPT Discharge
- Maximum Head 30 Ft.
- Maximum Flow 103 GPM
- Semi-Open, Clog Resistant Impellers
- Available with Totally Enclosed Fan Cooled (TEFC) 1/3, 1/2 and 3/4 HP 115 VAC, Single Phase Motors
How the Industrial Sump Pumps Work
The AMT series of Industrial/Commercial Sump pumps is meticulously crafted for robust commercial applications and is equally suitable for residential use where a blend of durability and high performance is essential. These pumps are offered in stainless steel, bronze, and cast iron constructions, featuring Totally Enclosed Fan-Cooled (TEFC) motors ranging from 1/3 to 3/4 HP, ensuring optimal pump selection across various applications. Each model is inclusive of a stainless steel shaft, screen, and float. The motors are equipped with an automatic switch and come with an 8-foot 16/3 115 VAC line cord. It is recommended that the sump pit for these pumps should have a minimum diameter of 14" and a depth of 24".
Highlights
- 304 Stainless Steel Casing, Motor Housing, Shaft and Hardware
- Cast Iron Impeller, Top and Pump End
- Light Weight Slim Design
- Oil Lubricated Seals, Nitrile O-Rings
- Lower Seal — Silicon-Carbide, Viton®
- Upper Seal — Carbon Ceramic, Viton®
- Thermal Overload Protected
- 2” NPT Discharge
- 1/2 to 1 Horsepower
How the IPT Submersible Pumps Work
Submersibles with a slim design and lightweight build, listed by CSA, showcase a top discharge, cast-iron impellers, and components made of 304 stainless steel, including casing, motor housing, shaft, and hardware. The pump motor is safeguarded against thermal overload. An optional mercury-free float switch with a piggyback configuration is also offered. Concerning the float switches, the mercury-free liquid level control features a piggyback plug integrated into the cord. This allows the pump motor to connect to the cord, and the entire assembly can be plugged into a standard grounded outlet.
Highlights
- Cast Iron with Stainless Steel Motor Housing
- Carbide Tipped Shredder Impellers
- Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability
- Triplex Seal System: Double Mechanical Seals Plus Shaft Seal
- Lower Seal – Silicon Carbide
- 115, 230 or 460 VAC @ 60 Hz Available
- 1 to 5 Horsepower
- 2”, 3” or 4” NPT
- UL/CSA Listed
- Single or Three Phase Available
How the Shredder Sewage Submersibles Work
AMT's Submersible Shredder Sewage pumps incorporate an improved spiral shredder mechanism plate and a carbide-tipped impeller to prevent clogging and minimize maintenance when handling stringy, fibrous, and sludge-type waste. These pumps find applications in sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood control, and emergency situations. The motors are designed for continuous duty, and single-phase models come with thermal overload protection. It's crucial to ensure that the liquid level remains above 85%, as failing to do so may result in pump damage and void the warranty.
Highlights
- Cast Iron with Stainless Steel Motor Housing
- ½ HP and 1 HP, 115 VAC, 60 HZ with 20 Foot Cord
- 2” and 3” NPT Discharge Port with Hose Adapter
- Clog Resistant Impeller
- Continuous Duty with Automatic Thermal Overload Protection
- ½ Horsepower Models: Heavy Duty Polypropylene Strainer and Ceramic/Carbon Mechanical Seal Plus Shaft Seal
- 1 Horsepower Models: Stainless Steel Strainer and Dual Ceramic/Carbon Mechanical Seal Plus Shaft Seal
- Built-In Carry Handle for Portability
- UL/CSA Listed
How the Submersible Pumps Work
AMT Industrial Submersible pumps exhibit qualities of being lightweight, portable, dependable, and energy-efficient. The impeller, resistant to clogging, is specifically designed for general dewatering pump applications, covering scenarios such as sump pumps, basements, construction drainage, dewatering, wastewater treatments, agricultural irrigation, flooding, and other instances demanding the removal of clear or drainage water. The motors are rated for continuous duty at 115VAC, 60 Hz, and come with a standard cord/plug, along with automatic thermal overload protection.
Highlights Model 5010-99
- Heavy Duty Corrosion Resistant Stainless Steel Housing with Plastic Internals
- 1-1/4” NPT Discharge with Adaptor
- Automatic Tethered Float Switch Included
- 3/4 HP, 115VAC UL Cord with 3 Prong Plug
- Thermal Overload Protection
- Garden Hose Adapter Included
Highlights Model 5000-95
- Heavy Duty Corrosion Resistant Stainless Steel Housing with Cast Iron Internals
- Automatic Vertical Float Switch Included
- 2/5 HP, 115VAC UL Cord with 3 Prong Plug
- Thermal Overload Protection
- Oil Chamber Design with Ball Bearing and Secondary Shaft Seal for Long Life
How the Submersible Utility Sump Pumps Work
AMT Lightweight Submersible Drainage/Sump pumps come equipped with integrated float switches. Designed for residential, commercial, and industrial applications, these submersibles offer versatile functionality.
