📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
| Weight (lbs) | 0.75 |
|---|
- OVERVIEW
- SPECIFICATIONS
- DOCUMENTS
- DOCUMENTATION
- PARTS / ACCESSORIES / KITS
- RELATED PRODUCTS
- REVIEWS
- VIDEO
- Application
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1 1/2", and the long flow sensor is used in 2" and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Fields of Application:- Rugged Polypropylene-Ryton or PVDF sensor for corrosive liquids and gases
- Adjustable set point with LED for flow or no-flow status indication
- 60VA relay selectable NO or NC via power supply wiring polarity
- Solid state sensor is not damaged by over-ranging flow velocities
Brand Flowline Product Type Sensor Max Temperature 140°F (60°C) Check Type / Wetted Material PP-Ryton Max Pressure 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C Voltage 12-36 VDC Cable Length 10ft (3m) Cable Type 4-conductor, shielded #22 AW Max Viscosity 200 cps Cable Material PP Consumption 70 mA maximum Contact Rating 60 VA, 1A maximum Contact Type SPST relay Gasket Material Viton Sensor Length Long Material - Sensor PP / Ryton Sensor Rating NEMA 4X (IP65) Set Point Range 1 to 90 fps (0.3 to 27 mps) Process Mount 3/4 in NPT
