CORROSION RESISTANT ALLOY PUMPS:

PUMPS ARE AVAILABLE IN A WIDE RANGE OF CORROSION-RESISTANT MATERIAL

MATERIAL	NORMALLY USED FOR FLUID SUCH AS. . .
Type 316 Stainless	Cleaners, caustic materials, salt solutions, chlorinated solvents, general corrosion-resistant usage. Photographic chemicals, deionized water, fatty acids, phosphoric acid, citric acid & lactic acid.
Carprenter 20 CB 3	Sulphuric acid, phosphoric acid, chromic acid, plating solutions.
Hastelloy B and C	Hydrochloric Acid, Ferric Chloride.
Titanium	Nitric acid, chrome sulphuric acid, chlorine water, ferric chloride, hot salt solution, sea water.
Zirconium	Hot hydrochloric acid, boiling chromic acid, boiling caustics.
Monel	Sea water, hydrofluoric acid.
Nickel	Hot caustic solutions.

PEDESTAL MOUNTED :

Flexible-coupled units consist of a pump bolted to a bearing pedestal to which power is transmitted by a flexible coupling from a power source.

Flexible-coupled units are required by many end users for various reasons: 1) standard rigid base motor is preferred; 2) C-face motors are not available; 3) ease of motor replacement is important; 4) certain electrical, mechanical, or corporate codes require a channel mounted, flexible coupled pump.

All of these requirements are satisfied throughout the whole range of the R. S. Corcoran Company Model F pumps.

SPECIFICATIONS

Model No.	Size	Flow @ Indicated Head
Model No.	Size	20’	60’	100’	150’	200’
2000-G	1-1/2x2	110	--	--	--	--
3000-FAA-1	1x1-1/2 (2x1)	160	150	130	65	--
3000-FAB-1	3x1-1/2 (2x1-1/2)	--	125	175	--	--
3000-FA10-2	3X2 (2x2)	--	130	265	25	--
4000-FAA-1	1-1/2x1	--	--	--	122	150
4000-FA50-2	3x1-1/2 (2x1-1/2)	--	--	--	175	200
4000-FA70-2	4X3	--	--	100	650	300
5000-A05-2	2X1 (1-1/2X1)	--	--	210	215	200

> > Have a question? Our engineers are on standby to assist you at 1-800-426-3856.