CORROSION RESISTANT ALLOY PUMPS:

PUMPS ARE AVAILABLE IN A WIDE RANGE OF CORROSION-RESISTANT MATERIAL

MATERIAL	NORMALLY USED FOR FLUID SUCH AS. . .
Type 316 Stainless	Cleaners, caustic materials, salt solutions, chlorinated solvents, general corrosion-resistant usage. Photographic chemicals, deionized water, fatty acids, phosphoric acid, citric acid & lactic acid.
Carprenter 20 CB 3	Sulphuric acid, phosphoric acid, chromic acid, plating solutions.
Hastelloy B and C	Hydrochloric Acid, Ferric Chloride.
Titanium	Nitric acid, chrome sulphuric acid, chlorine water, ferric chloride, hot salt solution, sea water.
Zirconium	Hot hydrochloric acid, boiling chromic acid, boiling caustics.
Monel	Sea water, hydrofluoric acid.
Nickel	Hot caustic solutions.

CLOSE-COUPLED

Direct-mounted (close-coupled) units are mounted directly to the motor rabbet through a stub shaft. This design is ideally suited for 6 pole (1150 rpm), 4-pole (1750 rpm), and most 2 pole (3450 rpm) applications. Motors are available through 75 hp in the TEFC enclosure. Consult the factory for special motor requirements: e.g. Mill & Chem, Explosion-Proof, Drip-Proof, Chemical Duty.

SPECIFICATIONS

Model No.	Size	HP	Flow @ Indicated Head
Model No.	Size	HP	Max. Flow	Max Head
2000-D	1/2x3/4	1/4	20	22
2000-D	1x1-1/2	1/4	54	21
2000-D	1-1/2x2	1/3	65	22
3000-AA-1	1-1/2x1 (2x1)	1/3	90	40
3000-AB-1	3x1-1/2 (2x1-1/2)	2	145	37
3000-A10-2	3x2 (2x2)	2	152	38
4000-AA-1	1-1/2x1	3	140	80
4000-A50-2	3x1-1/2 (2x1-1/2)	5	220	68
4000-470-2	4x3	10	610	50
5000-A05-2	2x1 (1-1/2x1)	5	160	145
5000-A50-2	3x1-1/2 (2x1-1/2)	10	315	148

> > Have a question? Our engineers are on standby to assist you at 1-800-426-3856.