| RE 88 PUMPS TUBE |
| for almost complete
drainage |
| |
 |
The RE 88 pump
tube can be combined with any of the Lutz
air or universal motors. The wide range of
motors offered makes these pumps virtually
universal in application.
To prevent any backflow of fluid, a sealing
pot is provided in the base of the pump that
can be opened and closed by moving a lever
beneath the hand wheel.
The pump tubes RE 88 are available in stainless
steel 316. Standard immersion depths are 27”,
39”, and 47”. Special immersion
depths on request. |
| |
| SPECIFICATIONS |
|
| Quantity: |
up to 20 GMP |
| Delivery Head: |
up to 64.4 FT |
| Temp of medium: |
up to 212o
F |
| Viscosity: |
up to 1500 cps |
|
| |
|
| |
|
|
| |
|
| |
|
| MP MIXING PUMP
TUBE |
| |
|
 |
The MP mixing
pump tube can be combined with any of the
Lutz air or universal motors. The wide range
of motors offered makes these pumps virtually
universal in application.
The mixing pump tube is equipped with special
holes for the mixing function. The mixing
and pumping functions can be infinitely varied
relative to one another. Immersion depth 39”.
Special immersion depths on request. The mixing
pump tube is available in stainless steel
316 and polypropylene (PP). |
| |
| SPECIFICATIONS |
|
|
| Quantity: |
up to 51 GMP |
| Delivery Head: |
up to 36 FT |
| Temp of medium: |
up to 212o
F |
| Viscosity: |
up to 1000 cps |
|
| |
|
| For more information
please refer to pump tube comparison. |
|
|
|
| B2 DRUM &
LABORATORY PUMP |
| |
|
| Universal motor
120 volt, 60 HZ, power input 230 watt, with
overload protection, on/off switch, double
insulation, splash-proof and radio-supressed.
Not suitable for hazardous duty. |
 |
Seal-less pump
tube in polypropylene (PP) or stainless steel
316. Immersion depth 25” or 35”.
Tube diameter 1”,
1-1/8” or 1-1/4”. |
| SPECIFICATIONS |
|
|
| Quantity: |
up to 19 GMP |
| Delivery Head: |
up to 22 FT |
| Viscosity: |
up to 380 cps |
|
| |
|
|
| MEI6-UL (EX)
MOTOR |
| |
| Motors available
are B 36, B 28, B 55-T, B 40-UL, MD-1 and
MD-2. Please see detailed motor data in specific
column. Two pump tubes of stainless steel
316 are available, with stators of NBR, NBR |
 |
light, Viton,
PE or PTFE. Shaft is sealed by a mechanical
seal or stuffing box. Tube diameter 2”.
Immersion depth 39”. Special immersion
depth from 20”-78” on request.
Threaded connection
R 1-1/2”, hose connection 1-1/4”.
The speed reducer regulates the motor speed
down to approx. 690 RPM. |
| |
| SPECIFICATIONS |
|
|
| Quantity: |
up to 6 GMP |
| Delivery Head: |
up to 58 FT |
| Viscosity: |
up to 60,000 cps |
|
| |
|
|
| |
MD AIR MOTOR |
| |
|
 |
Compressed-air
driven motor with a power output of approx.
300 watt at 87 PSI operating pressure and
a speed of 6900 RPM, air consumption approx.
17 CFM. With sound absorber and earth connection.
Suitable for hazardous duty. |
| |
| SPECIFICATIONS |
|
|
| Quantity: |
up to 100 gals |
| Delivery Head: |
up to 13 FT |
| Viscosity: |
up to 380 cps |
|
|
