Stainless Steel Tanks
B&G

INDUSTRIAL RECTANGULAR STAINLESS TANKS

 
Designed for plating and other industries, our Rectangular Tanks are of T-304 stainless steel with a 2B mill finish. Welds are fully penetrating and are brushed clean. All tanks are self-supporting up to the specific gravity of 1. Additional reinforcements are added as necessary. Tanks are designed to sit on the floor or be supported by a bottom structure, a wide range of optional fittings are available. Covers are 18 gauge stainless steel. Sanitary tanks can be fabricated with large corner radii, ground welds and sanitary outlets. Type 316 stainless steel and other construction materials are available.
 
SPECIFICATIONS
Length x Width -- Inches
12 x 5 15 x 15            
12 x 18 15 x 18 18 x 18          
12 x 24 15 x 24 18 x 24 24 x 24        
12 x 30 15 x 30 18 x 30 24 x 30 30 x 30      
12 x 36 15 x 36 18 x 36 24 x 36 30 x 36 36 X 36    
12 x 42 15 x 42 18 x 42 24 x 42 30 x 42 36 X 42 42 X 42  
12 x 48 15 x 48 18 x 48 24 x 48 30 x 48 36 X 48 42 X 48 48 X 48
12 x 54 15 x 54 18 x 54 24 x 54 30 x 54 36 X 54 42 X 54 48 X 54
    18 x 60 24 x 60 30 x 60 36 X 60 42 X 60 48 X 60
      24 x 66 30 x 66 36 X 66 42 X 66 48 X 66
        30 x 72 36 X 72 42 X 72 48 X 72
All tanks above available in any of these depths:
12, 15, 18, 24, 30, 36, 42, 48, 54, 60, 72.
CYLINDRICALSTAINLESS TANKS
     
 
Econo Tanks are a new addition to the illustrated IS Series Industrial Tanks. This new design is inexpensive and budget priced. The bottoms are
 
square corner welded and are NOT recommended for food or pharmaceutical use. Econo Tanks should not be used when product cross contamination is a process concern.
FEATURES
• 2B mill finish as fabricated with weld seams wire brushed inside & out
• Welded carbon steel angle iron legs with stainless steel back up pad
• Sloped bottoms = 3/4” per foot of diameter
• Standard cone bottoms are 15o
• All types of industrial fittings, valves, flanges are readily available; consult factory
 
SPECIFICATIONS
Gallons Model Diameter Depth
10 IS10 13 18
15 IS15 16 18
20 IS20 16 24
25 IS25 18 24
30 IS30 18 30
40 IS40 22-3/4 24
50 IS50 22-3/4 30
60 IS60 22-3/4 36
75 IS75 28 30
100 IS100 30 36
125 IS125 30 42
150 IS150 36 36
200 IS200 38 48
250 IS250 40 48
300 IS300 45 48