| F-400N SERIES INLINE
FLOWMETERS |
|
|
|
| |
|
|
|
These flowmeters
have a tough impact resistant machined acrylic body
with threaded Noryl end adapters. A #316 stainless
steel guide helps reduce float oscillation and improve
overall meter operation. Floats do not contact the
meter body, as do rib guided floats. This protects
critical float surfaces from undesirable wear. Dual,
GPM/LPM, scales are screen printed onto the meter
body directly in front of the float. Air calibrations,
STP, are also available.
| |
| SPECIFICATIONS: |
| Model
No. |
Range
GPM LPM |
Nom.
Scale
Length (MM) |
Adapter
Size |
| F-40375LN-6 |
.1
to 1 - .4 to 4 |
100 |
3/8”
FNPT |
| F-40376LN-6 |
.2
to 2 - .75 to 7.5 |
100 |
3/8”
FNPT |
| F-40500LN-6 |
.5
to 5 - 1.8 to 18 |
100 |
3/8”
FNPT |
|
F-40750LN-12 |
1
to 10 - 4 to 40 |
127 |
3/8”
FNPT |
|
F-41000LN-12 |
5
to 21 - 22 to 78 |
127 |
1”
FNPT |
|
| |
|
|
|
|
| |
|
|
|
|
| F-500
& F-500E PANEL MOUNT SERIES FLOWMETERS |
| |
|
|
|
These flowmeters have
a durable, one piece machined acrylic body that
does not require expensive housing, #316 stainless
steel float guide, and polypropylene port adapters.
Two #8-32 threaded holes are positioned on the rear
of the meter body to facilitate panel mounting.
F-500 flowmeters may be used with temperatures up
to 125oF or 150 psi.
F-500E flowmeters offer body styling similar to
the F-500 but are more compact to accommodate lower
flow rate applications. Five calibrations are currently
available.
| |
| SPECIFICATIONS: |
| Model
No. |
Range
GPM LPM |
Nom.
Scale
Length (MM) |
Adapter
Size |
| F-55200
L |
.025
to .25 - .1 to 1 |
100 |
1/4”
MNPT |
| F-55200
L |
.1
to 1 - .4 to 4 |
125 |
3/8”
MNPT |
| F-55200
L |
.2
to 2 - .75 to 75 |
125 |
3/8”
MNPT |
|
F-55200 L |
2
to 10 - 8 to 38 |
95 |
3/4”
MNPT |
| F-55200
L |
2
to 20 - 22 to 82 |
110 |
1”
MNPT |
|
| |
|
|
|
|
| |
|
|
|
|
| F-300
SERIES FLOWMETERS |
| |
|
|
|
F-300 meters utilize
a pitot tube pick up, a variable area chamber and
hard edged floats to provide a convenient and economic
means of measuring water flow in a closed pipe system.
The body is one piece machined acrylic and scales
are permanent heat imprinted.
In addition, low flow rate units (“R”)
are now available. These units are ideal for applications
where flow rates are typically low, such as: swimming
pools, spas, solar heating systems and irrigation.
CF-300 flowmeters may be used with temperatures
up to 190oF or 400 psi.
Contact Burt Process Equipment at (203) 287-1985
for F-300 Series pricing. |
|
|
|
| |
|
