Burtprocess.com..Neutralization Systems, High purity systems, Pump Stations

Duplex Diaphragm Demand Pumps

FLOJET
Click for Manufacturer Page

FLOW RATE TO 2 GPM

FLOJET 2100 SERIES

FEATURES

- Flow rates from 0.5 to 2 GPM (1.9 to 7.6 l/min.)

- Operating pressures to 60 PSI (4.1 bar)

- Standard 12V DC, 24V DC and 115 or 230V AC

- versions available

- Option of switch or internal bypass

- Available in a variety of chemical resistant materials

- CE mnodels available

PERFORMANCE
Pump Design	Duplex Diaphragm
Shaft Seal	None
Motor	Permanent Magnet Motor
Standard	TENV (non-ventilated)
Optional	TEFC (fan-cooled)
Voltage	12 & 24 Volt DC, 115 & 230 Volt AC
Cycle	50/60 hertz for AC Models
Pressure Switch Setting	40 - 60 PSI (2.1 - 4.2 bar)
Maximum Operating Pressure	50 PSI (3.5 bar)
Maximum Fluid Temperature	1800 F (710 C)
Self-Priming	Up to 8 ft. (2.4 m) Vertical Height
Ports	3/8” NPT, May be rotated in 900 increments

FLOW RATE TO 2 GPM
FLOJET 2130 SERIES
FEATURES
- Flow rates from 0.5 to 2 GPM (1.9 to 7.6 l/min.)
- Operating pressure to 100 PSI (6.9 bar)
- Standard 12V DC, 24V DC and 115 or 230V AC
- Built-in pressure switch/pump on demand control
Available in a variety of chemical resistant materials
- CE models available

PERFORMANCE	GFDGFDG
Pump Design	Duplex Diaphragm
Voltage	12 & 24V DC or 115 & 230V AC
Cycle	50/60 hertz for AC Models
Shaft Seal	None
Motor	Permanent Magnet TEFC
	(with solid state rectifier on 115 & 230 Volt)
Maximum Pressure Switch Setting	95 PSI (6.6 bar)
Maximum Operating Pressure	85 PSI (5.9 bar)
Maximum Liquid Temperature	1600 F (710 C)
Self-Priming	Upto 8 Ft. (2.4 m) Vertical Height
Ports	1/4” NPT, May be rotated in 900 increments