INDUSTRIAL RECTANGULAR STAINLESS TANKS
CYLINDRICAL STAINLESS TANKS
Designed for plating and other industries, our Rectangular
Tanks are of T-304 stainless steel with a 2B mill finish.
Welds are fully penetrating and are brushed clean. All tanks
are self-supporting up to the specific gravity of 1. Additional
reinforcements are added as necessary. Tanks are designed
to sit on the floor or be supported by a bottom structure,
a wide range of optional fittings are available. Covers
are 18 gauge stainless steel. Sanitary tanks can be fabricated
with large corner radii, ground welds and sanitary outlets.
Type 316 stainless steel and other construction materials
are available.
Econo Tanks are a new addition to the
illustrated is Series Industrial Tanks.
This new design is inexpensive and
budget priced. The bottoms are square corner welded and are not
recommended for food or pharmaceutical
use. Econo Tanks should not be
used when product cross contamination
is a process concern.
• 2B mill finish as fabricated with weld
seams wire brushed inside & out
• Welded carbon steel angle iron legs
with stainless steel back up pad
• Sloped bottoms = 3/4” per foot of diameter,
Standard cone bottoms are 150
