The “MG200” Series magnet drive gear pumps are compact precision performance pumps for high technology applications.

The magnet drive principle provides a totally sealed pump chamber which is capable of handling a wide range
of corrosive liquids with a high degree of safety. The pump housing is available in AISI 316L, SAF 2205 or AISI 303. The Gears are available in PTFE or Peek™.

In operation the MG200 Series pumps are noiseless, pulsation-free and capable of handling relatively high temperature
liquids i.e. 120 °C (248 °F) with a low coefficient of expansion.

The principle of the magnetic drive comprises an inner magnet embodied in the pump and connected to the driving gear, and an outer magnet connected to the motor shaft. The pole-to-pole alignment of the two magnets provides the driving motion
to the pump. Decoupling will occur when the pump load exceeds the coupling torque between the magnets.
• 1/8" NPT or GAS ports
• Relief valve available upon request

> > Have a question? Our engineers are on standby to assist you at 1-800-426-3856.