The “MG 200” Series magnet drive gear pumps are compact precision performance pumps for high technology applications.

The magnet drive principle provides a totally sealed pump chamber which is capable of handling a wide range of corrosive liquids with a high degree of safety. The housing of the pump and the internal metal parts are in AISI 316 L stainless steel and the gears
are available in PTFE or Peek™.

In operation the MG 200 Series pumps are noiseless, pulsation-free and capable of handling relatively high temperature liquids i.e. 120 °C (248 °F) with low coefficient of expansion.

The principle of the magnetic drive comprises an inner magnet embodied in the pump and connected to the drive gear,
and an outer magnet connected to the motor shaft. The pole-to-pole alignment of the two magnets provides the driving
motion to the pump. Decoupling will occur when the pump load exceeds the coupling torque between the magnets.
• 1/8" NPT female threaded intake/outlet
• Relief valve available upon request

> > Have a question? Our engineers are on standby to assist you at 1-800-426-3856.