APPLICATIONS: Continuous-duty, high-pressure pumps are used where positive displacement pumps are normally required, but where liquids containing small particles or solids equipment, pilot plant operations, or laboratory use where high purity or corrosive service is needed.
DESIGN: End suction with an open impeller close-coupled to mount to any standard 56C motor.
SEAL: Type 21 mechanical rotary seals with carbon, Viton, and ceramic are standard on the single or double configurations. Type 9 single seals with chemical-grade carbon, Teflon, and silicon carbide are optional.
SPECIFICATIONS:
Model |
Alloy |
Inlet |
Outlet |
Best Eff
Point
(BEP) |
Max
Flow
(GPM) |
Shut-
off
Head
FT |
HP
Range |
Speed
(RPM) |
Weight
(Pump &
Adaptor) |
ECJ3 |
316 SS |
1/2” FNPT |
1/2” FNPT |
8 GPM
110 ft |
14 |
175 |
1 - 2 |
3450 |
25 lbs |
> > Have a question? Our engineers are on standby to assist you at 1-800-426-3856.
